Skip to main content
Get Your Sketch into Xactimate

Upload floor plan into Xactimate

Joe Tolzmann avatar
Written by Joe Tolzmann
Updated over 3 weeks ago

Downloading and Importing a Floor Plan into Xactimate

Step 1: Access and Download the Floor Plan from RealSee

  1. Log in to RealSee Web Console

    • Go to the RealSee Web Console.

    • Log in to your account.

  2. Select the Project

    • Navigate to the project for which you need the floor plan.

  3. Download the Schematic Floor Plan
    ​​

    • Click the “Add-ons” tab.

    • Locate “Schematic Floor Plan” and click “Download”.

    • Adjust settings if needed, then click “Download Now” and confirm with “OK”.

    • Note: Downloading floor plans is free for RocketPlan users.

  4. Wait for Download Completion
    ​​

    • The process takes a few seconds.

    • You will receive an email notification when the floor plan is ready.

    • Refresh the page to see the “Download Now” button appear.

  5. Save the Floor Plan
    ​​

    • Click “Download Now” and save the floor plan to your computer or laptop.

  6. Upload to RocketPlan

    • Open your RocketPlan project.

    • Upload the downloaded floor plan as a photo.

Step 2: Import the Floor Plan into Xactimate

  1. Create a Project in Xactimate

    • Open Xactimate and create a new project.

  2. Import the Floor Plan

    • Go to the “Options” tab.

    • Click “Import” and select “Import Underlay Image”.

    • Choose the saved floor plan file from your computer.

  3. Set the Scale

    • Select two endpoints of a known wall.

    • Enter the correct wall length and click “OK”.

  4. Trace the Floor Plan

    • Use the underlay as a guide to trace and add all rooms and areas in Xactimate.

  5. Remove the Underlay

    • Once the floor plan is fully traced, delete the underlay to keep only the traced layout.

Did this answer your question?